The machine adopts a practical horizontal cylindrical structure.

The drive shaft is equipped with an inflatable seal, which can replace the air with water when cleaning.

adopts a fluidized bed granulation process, and the particles obtained are relatively round and have good fluidity.

Compared with the traditional process, this model can reduce the adhesive by 25% and shorten the drying time. Each batch of materials is dry mixed for 2 minutes and granulated for 1-4 minutes. The efficiency is 4-5 times higher than that of the traditional process.

Dry mixing, wet mixing and granulation are completed in the same sealed container, which meets GMP requirements.